Door Hinge Installation Tips What to Do When Installing

The door hinge is a relatively common part, it plays a fixed door effect, even the best parts also need installation skills, and sometimes because of improper installation techniques, resulting in the unobstructed opening and closing of the door, today Xiaobian to share for everyone Door hinge installation tips and what precautions to take during installation.

Door Hinge Installation Tips

Minimum clearance

Gap refers to the gap on the side of the door when the door is open. The gap is determined by the thickness of the door and the type of hinge. What kind of hinge model is needed can be compared at each different angle.

2. Minimum gap of half-covered door

When the two fans need to use a side panel, the total required gap is twice the minimum gap so that the two doors can be opened at the same time.

3.C distance

C distance means the distance between the edge of the door and the hole in the plastic cup. Generally, the maximum dimension of the hinge is the C-square. According to different models, the wider the distance C, the smaller the gap.

4. Door coverage distance

Door coverage is the distance that covers the side panel.

5. Clearance

Clearance means the distance between the outer edge of the frame and the outer edge of the door when the cover is fully covered. The gap refers to the distance from the outer edge of the door to the outer edge of the cabinet in the case of the full cover; between the two doors in the case of a half cover. In the case of an inside door, clearance refers to the distance from the outside of the door to the inside edge of the side panel of the cabinet.

What are the precautions when installing?

1. Pay attention to the installation location and quantity

The door in the home is relatively heavy, it is recommended to use three hinges, the general common door with two hinges is enough, it should be noted that the corners of the door and window sector can not use the hinge, should be installed in the door and window fan One-tenth of the body, to avoid the average divided into three, should adopt the top two, the next form. Prevent door imbalance.

2. Preventing the falling fan

In the door hinge installation technique , the falling fan is the most critical, it refers to the skill in the installation of the door, so that the top of the next gradually widening, and the following gap slowly narrowed, resulting in the opening and closing of the door is not smooth There will even be a drop of the door. This is generally due to the selection of hinges with different specifications.

3. Grasp the gap distance

In order to make the appearance of the door look good, we must grasp the distance between the door and the hinge, the general normal gap is 3-5 mm.

4. Make sure the accessories match

The specifications of the hinge in the door hinge installation technique are very important and must be matched according to the thickness, length and width of the door.

Xiao Bian summary: The above is the small series for everyone to introduce the door hinge installation skills and installation of what precautions, when the door is installed parts can not be error, it may lead to many adverse consequences, I hope the above introduction Can help you, if you need to know more, please continue to pay attention to this site.